TSI Instruments 9565-P User Manual

Operation 21
DATA LOGGING
Measurements
Measurements to be logged to memory are independent of
measurements on the display, and must therefore be selected
under DATA LOGGING  Measurements.
 When set to ON, measurement will be logged to memory.
 When set to DISPLAY, measurement will be logged to memory
if it is visible on the main running screen.
 When set to OFF, measurement will not be logged to memory.
N O T E
Pitot Velocity and AFProbe Velocity cannot both be ON at the same
time, nor can one be set to PRIMARY and the other to ON. Only
one can be ON at any given time.
Log Mode/Log Settings
The 9565 can be programmed to store measurements to memory
in several different logging formats:
 Manual
 Auto-save
 Cont-key
 Cont-time
 Program 1
 Program 2
MENU
Zero Press
Display Setup
Settings
Flow Setup
VOC Setup
Actual/Std Setup
Data Logging
Zero CO
Applications
Calibration
Bluetooth Functions
DATA LOGGING
Measurements
Log Mode Cont.-time
Log Settings
Choose Test Test 001
Name Test
View Data
Delete Data
% Memory
MEASUREMENTS
Temperature DISPLAY
Velocity DISPLAY
Flow DISPLAY
Heatflow OFF
Pressure DISPLAY
Baro Press ON
ON DISPLAY OFF
w ww. . com
information@itm.com1.800.561.8187

TSI Instruments 9565-P Specifications

General

Brand	TSI Instruments
Model	9565-P
Category	Measuring Instruments
Language	English