EasyManuals Logo
Home>TurboChef>Oven>NGC

TurboChef NGC User Manual

TurboChef NGC
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12 HhC 2020 OVEN
The HhC 2020 Oven
What Makes the HhC 2020 Special?
1. e next generation of impingement.
2. Variable-speed independent top and bottom
fans.
3. Mono-fi nger plate design.
- More effi cient use of oven cavity
- Smaller footprint
4. Eight diff erent cooking profi les.
- Gives the ability to cook many diff erent items
on one conveyor at diff erent parts of the day.
5. UL
®-certifi ed models available (contains
catalytic converters).
Ventless
NOTE: Not all HhC 2020 oven models are UL®-
certifi ed for ventless operation.
1. e HhC 2020 is UL
®-certifi ed for ventless
operation, meaning it does not require a hood or
re suppression to operate under a normal load.*
2. What makes ventless possible?
- A platinum-based catalyst scrubs the air of
Volatile Organic Compounds (VOCs), such as
grease and smoke, and converts them into
CO
2
and H
2
O.
3. What are the advantages of ventless operation?
- Decreased startup cost for operators.
- Ability to cook hot food where it was
previously impossible.
4. TurboChef s ventless certifi cation does not
include cooking “fatty raw proteins.
- When cooking these types of products, too
much grease is produced.  e catalyst cannot
keep up and the oven will produce smoke.
is type of cooking will harm the oven over
time.
- What are examples of “fatty raw proteins”?
Rib-eye steak
Bone-in, skin on chicken breast
NOTE: Beef tenderloin and boneless, skinless
chicken breast are not considered to be “fatty raw
proteins.
*Ultimate ventless allowance is dependent upon lo-
cal authorities and jurisdictions; some of whom may
not recognize the UL
® certifi cation or application.
Edit Options Screen
e Edit Options screen allows the user to switch
between full edit, rigid, and fl ex options for profi le
name, belt speed, temperature, and % air.
When the rigid option is enabled for a given setting,
the soft key adjacent to that setting is disabled and
no menu editing is allowed.
When the full edit option is enabled for a given
setting, that setting is fully customizable and changes
are saved once the oven returns to the Oven Off /
Cooling Down Mode.
When the fl ex option is enabled for a given setting,
that setting is customizable within fl ex option
limitations (as described in the following sections),
and changes will reset when the oven returns to the
Oven Off /Cooling Down Mode.
NOTE:  e ex option does not apply to editing a
profi le name.
To access the Edit Options screen,
1. From the Oven Off /Cooling Down screen, press
the up key until the Confi g Mode screen
appears.
2. Press the Setup soft key to access the Setup
Mode screen.
3. Press Edit/Rigid/Flex soft key to access the
password screen.
4. Input the password 6-6-3-3 (M-O-D-E) by
pressing the soft keys adjacent to the numbers.
5. Change the desired edit options:
- Press the Name soft key to select full edit or
rigid for the profi le name.
- Press the Belt soft key to select full edit, rigid,
or ex for the belt speed.
- Press the Temp soft key to select full edit,
rigid, or ex for the profi le cook temperature
setting.
- Press Air soft key to select full edit, rigid, or
ex for the % air setting.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TurboChef NGC and is the answer not in the manual?

TurboChef NGC Specifications

General IconGeneral
BrandTurboChef
ModelNGC
CategoryOven
LanguageEnglish

Related product manuals