SPECIFICATION AND TIPS
6-4
In order to minimize the vibration transmitted to the whole-body the following best practice rules should be observed.
• Use the most suitable implement for the tractor and the task in hand.
• Adjust the seat to suit your weight and stature.
• Periodically check the condition of the cab suspensions and renew them if damaged.
• Check tire inflation pressure.
• Use front axle suspensions, if fitted.
• During transfers, adjust tractor speed in order to minimize the vibration level.
The seat vibration values, as obtained from the seat approval in compliance with 78/764/EEC (amended by 1999/57/EC) are
shown in the following table.
Technical data
Input vibration : Category A, Class I, II and III
Ambient temperature : 23℃
Seat type Corrected vibration level on seat
W10SSS
Light driver 59kg 1.24m/sec²
Heavy driver 98kg 1.12m/sec²
3. VIBRATION REFERRED TO THE OPERATOR POSITION
To Next Page
Loading...
Need help?
General
