Batteries and Charger
Batteries
The Titan scooter is programmed to work with sealed, maintenance-free 12V
batteries.
Full charging of the batteries prior to usage helps keep them operational and
lengthens their lifespan. Batteries can be charged at any time, without
concern for over-charging.
Charging the Battery
The charger works with standard wall outlet, between 100-240V. The charger
automatically prevents over-charging.
Figure 17 – Back panel of battery charger
Turn off the scooter before removing or installing batteries.
Note:
Do not use a car battery. Car batteries are not designed for the
Titan scooter, and can be dangerous. Battery lifespan is
influenced by treatment, number of recharges, storage and
usage.
The battery cannot be charged if it empties completely. It is
recommended that you recharge as often as possible.
Note:
To Next Page
Loading...
Need help?
General
