Ubee U10CO35 Cable Modem User Guide, v10_30_10
Ubee Interactive 15
Indicates that the cable modem is
Docsis1.0/Docsis1.1/Docsis2.0/Docsis3.0 compliant.
Displays the MAC address of cable modem.
Displays the serial number of cable modem (usually the
MAC address without “:” between octets).
Displays the current boot code version.
Displays the current software version.
Displays the current hardware version.
Indicates if a Certificate Authority (CA) key is installed or
not.
3.5 Status
Use the following procedure to review the operational status of the cable modem.
1. Access the web interface. Refer to page 13 for instructions if required.
2. Click Status from the left-side of the screen.
3. Instructions are provided below the following example.
Acquired a Downstream
Channel
Displays the current downstream lock status. The Status
field displays the downstream frequency. If the Comments
field displays Locked, the cable modem is locked onto the
frequency. Otherwise, it displays In Progress (the cable
modem is trying to lock on to a frequency).
Displays the current upstream ranging status. The Status
field displays the currently locked upstream frequency, and
the Comments field displays the ranging status of an
upstream lock.
Displays the current cable modem state. The Status field
displays OK, cable modem is operational. Otherwise, it
displays In Progress. The Comments field displays the