UBISLATE 7C+ User Manual

4
Technical Spec i fications
LCD Display 7" TFT Capacitive Multi-touch LCD – 800 x 480 pixels
OS Processor
Memory
Storage
Android 4.0.4
Cortex A8; 1Ghz 512MB RAM
4GB on board, expandable to 32GB via Micro SD
PC Interface Micro USB
Power
Audio
Video
Camera
Sensor
3.7V Li-Polymer rechargeable battery
External speakers, 3.5mm headset jack
GPU w/ HD video supported
Front Facing VGA Camera
G-Sensor (Orientation Sensor)
Connectivity Wi-Fi 802.1 1 b/g/n, GPRS
Software Over 30 languages supported, full office suite, 2 mobile browsers, social
networking, games, educational content, etc.
Quick Start Guide
Charging the Battery
Your device has a built-in battery. Before using the device for the first time, you must charge the battery
for at least 6-8 hours. Use only Datawind approved chargers. Unauthorized chargers may cause damage
to your device and/or may lead to overcharging and/or explosion. When your battery is low, the battery
level indicator will be very thin. If the battery level reaches a critical level, the device will automatically
turn off. Recharge the battery to continue use. Recharge the battery by first inserting the cable into the
charging head and then plugging the head into a standard AC power outlet. After the charging is
complete, unplug the charging head. Note that it is best to charge the device at room temperature. It is
not necessary to wait until the battery is completely drained before recharging, you may charge at any
time. Also, the battery will maintain its lifespan longer if it is not left uncharged for periods of more than
2 weeks at a time.
Power on
Press and hold “ ” button for 3 seconds to power on the device. It can take up to a minute and half to
boot the system. After system boot is completed, it will enter Android desktop. Slide the lock icon “ ”
to the right
to unlock the screen to start to use the
device.
Power Save mode and Lock Screen
You can turn off the screen to save power by quickly pressing the power “ ” button. The screen will
turn to Lock Screen mode. Repeat the process to reactivate the device.
Note: The device will remain operational as will any applications when the device is in power saving
mode, only the screen is turned off .

UBISLATE 7C+ Specifications

General

Brand	UBISLATE
Model	7C+
Category	Tablet
Language	English