POWER OFF/Reset Procedure:
1. When the PRE-SET time on the timer has expired (default is 15 minutes), the TIMER OFF
LED indicator will light up.
2. Or, the pulsing may be stopped ANYTIME by toggling the START/STOP switch towards
the STOP [O] position. [Skip Step 3 to restart the pulsing OR skip to Step 4 onwards to
turn off the machine.]
3. To RESTART the pulsing, simply toggle the START/STOP switch towards the START (I)
position. This will restart the pulsing with the pre-set time of the TIMER as well.
4. Before the device is POWERed DOWN (toggling the POWER ON/OFF switch to OFF
position), wait for 15 minutes after the pulsing has stopped.
5. After 15 minutes, toggle the green POWER ON/OFF switch at the lower right of the panel
to the OFF position. The machine should be completely turned off.
9
To Next Page
Loading...
Need help?
General
