UNI-T UT202A User Manual

1615
UT202A Operating Manual
Ω
(gure 7)
2. Set the rotary switch to and press
SELECT button to select measurement
mode.
3. The buzzer sounds if the resistance of a
circuit under test is less than 10Ω.
4. The buzzer may or may not sounds if the
resistance of a circuit under test is more than
10Ω.
Note:
When continuity testing has been completed,
disconnect the connection between the testing
leads and the circuit under test and remove
testing leads from the input terminals.

UNI-T UT202A Specifications

General

AC voltage	600 V
Resistance (max)	0.02 Ω
Measuring category	CAT II 600V, CAT III 300V
Battery voltage	9 V
Test leads	Yes
Certification	CE, RoHS
Product color	Black, Red

Weight and Dimensions

Depth	30 mm
Width	75.6 mm
Height	210 mm
Weight	220 g