UNI-T UT202A User Manual

43
Safety Information
This Meter complies with the standards
IEC61010: in pollution degree 2, overvoltage
category (CATII 600V, CAT III 300V) and double
insulation.
CATII: Local level, appliance, PORTABLE
EQUIPMENT etc., with smaller transient
overvoltages than CATIII.
CAT III: Distribution level, xed installation, with
smaller transient overvoltages than CAT IV
Use the Meter only as specied in this operating
manual, otherwise the protection provided by
the Meter may be impaired.
In this manual, a Warning identies conditions
and actions that pose hazards to the user, or
may damage the Meter or the equipment under
test.
A Note identifies the information that user
should pay attention to.
International electrical symbols used on
the Meter and in this Operating Manual are
explained on page 6.
UT202A Operating Manual

UNI-T UT202A Specifications

General

AC voltage	600 V
Resistance (max)	0.02 Ω
Measuring category	CAT II 600V, CAT III 300V
Battery voltage	9 V
Test leads	Yes
Certification	CE, RoHS
Product color	Black, Red

Weight and Dimensions

Depth	30 mm
Width	75.6 mm
Height	210 mm
Weight	220 g