UNI-T UT207 User Manual

When the Meter is at range, it beeps to remind user to insert temperature
probe.
The Meter automatically displays the room temperature when the temperature
probe is inserted but without any input.
The included point contact temperature probe can only be used up to 230 .
For any measurement is higher than that, the rod type temperature probe must
be used.
When the temperature measurement has been completed, disconnect the
connection between the temperature probe and the object under test, and remove
the temperature probe away from the input terminals of the Meter.
Note
Model UT207/208: OPERATING MANUAL
36

UNI-T UT207 Specifications

General

Backlight	Yes
AC current range	66 - 1000 A
DC voltage range	6.6 - 600 V
Resistance range	20 - 20000 Ω
Basic accuracy (frequency)	±(0.1%+3)
Basic accuracy (DC current)	±(1.5%+8)
Basic accuracy (DC voltage)	±(0.8%+1)
Basic accuracy (resistance)	±(1%+2)
Temperature measurement range	-40 - 1000 °C
Dimensions (WxDxH)	105 x 45 x 286 mm
Battery voltage	9 V

Weight and Dimensions

Weight	533 g