UNI-T UT231 User Manual

16
Model UT231: OPERATING MANUAL
C. Active Power (main display) + Phase Angle
(secondary display) Measurement (see figure 6)
Figure 6
starts recording the maximum AC current True RMS
value.
Press MAX/MIN again, the LCD displays MIN, it
starts recording the minimum AC current True RMS
value.
Press MAX/MIN again to show the present AC
current True RMS value.
The display shows OL when the current of the
tested conductor is higher than 1000A rms.
6.
7.
8.
When the measurement has been completed,
disconnect the connection between the conductor
under test and the jaw, and remove the conductor
away from the transformer jaw of the Meter.
Note
Brack
Red

UNI-T UT231 Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.02 - 0.5 kHz
AC current range	40 - 1000 A
AC voltage range	15 - 600 V
Temperature measurement range	-50 - 1000 °C
Dimensions (WxDxH)	112 x 39 x 303 mm
Battery voltage	1.5 V

Weight and Dimensions

Weight	601 g