UNI-T UT3216 User Manual

UT3200 Series User Manual
29
7.1.3 ACCOUNT
Two mode can choose
▪ ADMIN, all function can use except SYSTEM SERVICES
▪ USER, all function can use except SYSTEM SERVICES and FILE, the data will not save
Set account steps:
1. Press Setup shortcut to enter Setup page, use Function to choose SYSTEM CONFIG
2. Move the cursor key to ACCOUNT
3. Use Function button to set password
Set account password steps:
1. Press Setup shortcut to enter Setup page, use Function to choose SYSTEM CONFIG
2. Move the cursor key to PASSWORD
3. Use Function button to set password
Function button
Description
CHANGE PASSWORD
The password is consists of digits and
symbols only, up to 9 digits. If you
forget password, you can call UNI-T
company’s sales department
DELETE PASSWORD
Administrator will not protected by
password
7.1.4 Com mode
The Instrument is equipped with Mini-USB interface and RS232 interface. When Instrument
sensing interface signal change, it will connect with the host machine as the set of baud rate
and the keyboard will be locked. It should confirm the set of baud rate is right to make sure
Instrument communication is work correctly. Mini-USB and RS232 are use SCPI language to
program, configuration as follow
▪ Data bits: 8 bits
▪ Stop bit: 1 bit
▪ Parity check: no
▪ Baud rate: configurable
Com mode set steps:
1. Press Setup shortcut to enter Setup page, use Function button to choose SYSTEM CONFIG
2. Move the cursor key to COM MODE
3. Use Function button to choose RS232 or USB
4. Move the cursor key to number filed and then use Function button to choose baud rate

UNI-T UT3216 Specifications

General

Brand	UNI-T
Model	UT3216
Category	Thermometer
Language	English