UNI-T UT33B User Manual

Measurement Operation(1)
A. DC Voltage Measurement (see figure 2)
Warning
To avoid harms to you or damages to the Meter from electric shock, please do
not attempt to measure voltages higher than 500V although readings may be
obtained.
The DC Voltage ranges are: 200mV, 2000mV, 20V,
200V and 500V. To measure DC voltage, connect
the Meter as follows:
1. Insert the red test lead into theVΩmAterminal
and the black test lead into the COM terminal.
2. Set the rotary switch to an appropriate
measurement position in V range.
3. Connect the test leads across with the object
being measured.
The measured value shows on the display.
(figure 2)
13
Model UT33B/C/D: OPERATING MANUAL

UNI-T UT33B Specifications

General

Product type	Digital multimeter
AC voltage range	200 - 500 V
DC current range	0.2 - 10 A
DC voltage range	0.2 - 500 V
Basic accuracy (DC current)	±(1%+2)
Basic accuracy (DC voltage)	±(0.5%+2)
Basic accuracy (resistance)	±(0.8%+2)
Dimensions (WxDxH)	73.5 x 35 x 130 mm
Battery voltage	9 V
Battery low indication	Yes

Weight and Dimensions

Weight	156 g