UNI-T UT33B User Manual

This section provides basic maintenance information including battery and fuse
replacement instruction.
Maintenance(1)
A. General Service
l Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.
l To clean the terminals with cotton bar with detergent, as dirt or moisture in the
terminals can affect readings.
l Turn the Meter to OFF position when it is not in use and take out the battery
when not using for a long time.
Do not attempt to repair or service your Meter unless you are qualified to do
so and have the relevant calibration, performance test, and service information.
To avoid electrical shock or damage to the Meter, do not get water inside the
case.
Warning
37
Model UT33B/C/D: OPERATING MANUAL

UNI-T UT33B Specifications

General

Product type	Digital multimeter
AC voltage range	200 - 500 V
DC current range	0.2 - 10 A
DC voltage range	0.2 - 500 V
Basic accuracy (DC current)	±(1%+2)
Basic accuracy (DC voltage)	±(0.5%+2)
Basic accuracy (resistance)	±(0.8%+2)
Dimensions (WxDxH)	73.5 x 35 x 130 mm
Battery voltage	9 V
Battery low indication	Yes

Weight and Dimensions

Weight	156 g