26
Model UT513: OPERATING MANUAL
B. Replacing the Battery
Warning
To avoid electric shock, remove all the test leads
from the Meter when replacing the batteries.
Operating Caution
Donít mix to use old and new batteries.
Be careful the polarity is correct when installing
batteries.
Do not use the Meter if the battery indicator
( ) shows a battery empty condition.
Do you carry out measuring during the battery
compartment is open.
Figure 8. Battery Replacement
Follow Figure 8 and proceed as follows to replace the
battery:
Turn the Meter to OFF and remove all connections
from the terminals.
Remove the screw from the battery compartment,
and separate the battery compartment from the case
bottom.
Replace with 8pcs of new 1.5V (LR14) batteries.
Rejoin the case bottom and battery compartment,
and reinstall the screw.
To Next Page
Loading...
Need help?
General
