UNI-T UT70C User Manual

Functional Buttons (1)
Below table indicated for information about the functional
button operations.
Button Operation PerformedMeasuring
Function
Continuity
Test
Turn the continuity buzzer on and
off in resistance measurement
mode.
At OFF
position
At REC
mode or
REC mode
plus Hold
mode
Press while turning on the
Meter to disable the beeper at all
functions except short circuit and
diode testing.
To toggle between 100ms
response time and 1ms response
time under REC mode except at
resistance, capacitance and
continuity range.
MAX
MIN
Any rotary
switch
position
except at
conductance
mode.
Starts recording of maximum and
minimum values. Steps the
display through the sequence of
present, high (MAX), low (MIN)
and average (AVG) readings at
any mode.
In 1ms response time, it steps
through only MAX and MIN
reading.
At OFF
position
To select 1 second high accuracy
response time, press and hold
down MAX MIN while turning the
rotary switch to any function
setting.
RANGE Any rotary
switch
position
1. Press RANGE to enter the
manual ranging mode; the
Meter beeps.
2. Press RANGE to step
through the ranges available
for the selected function; the
Meter beeps.
3. Press and hold RANGE for
over 1 second to return to
autoranging; the Meter
beeps.
Model UT70C: OPERATING MANUAL
10

UNI-T UT70C Specifications

General

Brand	UNI-T
Model	UT70C
Category	Multimeter
Language	English