UTD2000 Series User Manual
44
9.2 Waveform storage and load
Press the Storage button, then press F1 to choose storege type as Reference Waveform,
and you will see the following menu.
Table 9-2 Reference waveform menu (Page 1)
The selected storage type is reference waveform.
Select load waveform to REF A.
Select load waveform to REF B.
Close the loaded waveform.
Table 9-3 Waveform storage menu
Select the set storage location.
Please refer section 9.1 “Edit file name”.
Press the button to store.
Table 9-4 Waveform load menu
Select load waveform to REF A.
Select load waveform to REF B.
Press the button to load.
The selected storage type is data file, stored in CSV format.
Data file can be stored in USB only.
Please refer section 9.1 “Edit file name”.
To Next Page
Loading...
Need help?
General
