UNI-T UTL8200 Series User Manual

UTL8200 User Manua
27
6
DSR
Data set ready
7
RTS
Request to send
8
CTS
Clear to send
9
RI
Ring indicator
6.2 Communication Settings
The communication settings are mainly used to set the communication mode between the
electronic load and the upper computer. The electronic load communicates with the upper
computer through RS232. The users can purchase the needed connecting cable to
achieve remote control with the electronic load. Before connecting to the upper computer,
please make sure to purchase the designated connection lead and set the correct
communication parameters.
Settings steps:
1. First press Shift, and then press Mode to enter the system <Menu> setting page.
2. Press [System Configuration] to enter the <System Configuration> page.
3. Select [Address] and [Baud Rate] in the <System Configuration> page, and set the
communication parameters to be consistent with the upper computer.

UNI-T UTL8200 Series Specifications

General

Brand	UNI-T
Model	UTL8200 Series
Category	Test Equipment
Language	English