To Next Page

To Previous Page

UTL8500 Series User Manual

to the State of Factory

Settings

5.1.1 Language

The electronic load provides two system languages (CHN/ENGLISH), which can be

changed in the system parameter settings. Select Language, turn the knob or change the

up and down direction keys to adjust to the language you need, and then press to

complete the setting.

5.1.2 Key Sound

The key sound is used to set whether to sound when you operate the keyboard or the

knob. If it is on, the buzzer will emit a short sound when you press any key or rotate the

knob. If it is off, no sound will be emitted at any time when you operate the button or the

knob. The factory default key sound is on.

5.1.3 Date

It is used to set the current date of the system. The user first selects the setting option,

moves the cursor to the position to be modified by the left and right direction keys, and

then rotates the knob or directly enters the number with the keyboard to adjust the

content to be modified. Lastly, press to complete the modification.

5.1.4 Warn Sound

The UTL8500 series electronic load has warn sound function. When the load ends or

encounters an abnormal problem during the test, the electronic load will emit a warn

sound through the built-in buzzer. When the test is successful, the load will emit two short

beeps. When the test fails or encounters other abnormalities, the load will emit two long

beeps. The warn sound is on by default. If you need to change it, select this option on the

system configuration page and adjust it.

5.1.5 Time

Time setting is the same as the date setting. It is used to set the current system time.

5.1.6 DIM Display

In order to adapt to the operating environment of different brightness, the electronic load

has a screen brightness adjustment function, which can be changed in the system

parameters. Select the option DIM Display, press , rotate the knob or use the direction

keys to adjust to the required value, and then press to complete the setting.

5.1.7 Initial Mode

When the initial mode is selected as "Last", the state of the load each time it is powered

UNI-T UTL8500 Series User Manual

Questions and Answers: