Unitech MS910 User Manual

10
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Power Management
When not being used, the scanner will enter idle mode to conserve battery power. Scan the
appropriate barcode below to set the time it takes the scanner to enter idle mode after any
scanning activity.
3 Minute (Default)
1 Minute
Idle Mode Disable
10 Minute
5 Minute
Scanner LED & Beeper Indication
Scanner LED & Beeper Indication
Green LED Red LED Beeper Remark
Power Off or
Standby
- - - See Power Off Timeout
Charging - Solid - -
Disconnected
or
Discoverable
Flash - - -
Initializing Flash Flash 1 long beep
-
Power Up
- -
1 long beep
-
Barcode
scanning w/o
proper
connection
Flash - 1 beep
-
Successful
barcode scan
1 Flash - 1 beep -
Successful
Connection
- - 2 beeps -
Unsuccessful
Pincode
Setup
- Flash 3 short beeps Scan [Pincode Stop] and retry
Low Power - Flash 5 beeps -
Scanner
Out of range 1 Flash -
4 beeps
(high-low-high-low)
Move closer to the host.

Unitech MS910 Specifications

General

Type	Handheld bar code reader
Wavelength	625 nm
Sensor type	CCD / CMOS
Scanner type	1D/2D
Read rate (max)	240 reads/s
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), MSI, Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Compact Matrix Code, Data Matrix
Wireless range	10 m
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Certification	CE, FCC ClassB
Product color	Black, Blue
LED indicators	Yes
Housing material	Acrylonitrile butadiene styrene (ABS)
Cables included	USB
Battery voltage	3.7 V
Power consumption	150 mA
Power source type	Battery
Number of reads per charge	5000
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	65 mm
Width	24 mm
Height	18 mm
Weight	24.6 g