Unitech PA600 User Manual

C H A P T E R 6
B A S I C I N V E N T O R Y F U N C T I O N S
47
Sending Collected P.O. Data to the PC
There are two ways to send collected purchase order data to from the PA600 to the PC:
1. Via the “Send Data” button on the Review screen.
2. Via the “Send Data” button on the ITScriptNet Menu.
Via The Review Screen
From the Review screen on the PA600, you can tap the Send button to send the data
(filename: HTPo.dat) to the PC. Once the send is successful, the collected data is
deleted from the PA600, and you will be prompted to retrieve updated data files which
are optional. To exit the Purchase Order program at this point, you would have to tap
“Back” to return to the item entry screen. There, you would have to tap the “Exit”
button to exit the program.

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm