PA730 User’s Manual
2.2 HF Setting
19
© 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
1. Tap go to APPS, and tap Settings and then under Wireless
& networks, tap More…
2. Tap NFC check box to Enable / disable NFC function.
3. If enable / disable NFC check box, it will also enable / disable Android
Beam too.
4. Make sure that both devices are unlocked and have NFC turned on. If the
other device has an Android Beam option, make sure it is also turned on.
5. Make sure that the NFC area (shaded part) of PA730 and the other phone's
NFC area are close to one another. Experiment by slightly moving the
phones until a connection is made. Tap the screen.
To Next Page
Loading...
Need help?
General
