12
a. Press and hold F button of LCD remote for 1 second until 2beeps sound and then
release the
F button.
b. The text
will flash on the LCD screen, press button to enter the menu.
c. Press
or button to move upor down in the menu, find CAR SELECT on the
menu.
d. Press
button to select the option you would like to adjust CAR 1 or CAR 2 for
further operation.
Caution: If the LCD transmitter does not function. Please insure it is set to operate
car #1
X. Clear the Flash Icon and Melody Sound: The Transmitter will reset
the flashing icons the next time the Ignition is cycled to the ON position.
Y. Stop The Trigger Melody Sound: While triggering the alarm the LCD
screen will alert the user through a melody sound and a flashing trigger icon. Press any
button on the LCD remote transmitter to stop melody sound only.
Z. Vibration / Melody Mode: (see advanced users menu for more info)
Press and hold the
F button until 2 beeps are heard. You will see the word
.Press the trunk button to scroll through the menu. Scroll to the
word
Vibrate”. When you see the word “Buzzer Vibrate”, press the
trunk button once to enter programming . Press the
button to change the setting.
(Buzzer, BZ VIB, Vibrate). Once a setting is chosen. Press the
button to confirm.
REMOTE START OPERATION:
A. TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press
button once on the transmitter.
2. The parking light will flashes one time to indicate the remote start received the signal.
3. The engine will start in approximately 5 seconds.
4. Once the engine is running, after couple seconds the parking lights will turn on and the
elimate controls will activate and adjust the vehicle’s interior time to your preset setting.
To Next Page
Loading...
Need help?
General
