Unitron uDirect 3 Guide

4746
Using uDirect  with an audio device
with a headphone jack
To benet from the streamer and remote
control functions, we recommend wearing
the uDirect around the neck.
Streaming music via a cable
The uDirect  must be switched on and
worn correctly around your neck.
. Insert the audio
cable into the
headphones socket
on your audio player
and start the player.
. Insert the other end
of the audio cable
into the audio input
on your uDirect. The audio streaming
is automatically activated.
Briefly press the access (
) button to stop
and restart streaming.
Setting up the FM receiver
uDirect  can be used together with FM
equipment.
. Place the FM transmitter near
the sound source and turn it on.
.
Turn the FM receiver on if
required.
. uDirect  must be switched
on and worn correctly.
. Attach your FM receiver to
the uDirect  via the FM input
as shown in the picture.
When FM is detected, you will hear
the FM notication tone for streaming
through your hearing aids. The FM notication
tone is similar to a phone ringtone.
Options for handling the FM signal during the
FM notication tone:
• Accept: Briefly press the access ( ) button.
• Put on hold: Press the access ( ) button
for twoseconds.

Unitron uDirect 3 Specifications

General

Brand	Unitron
Model	uDirect 3
Category	Hearing Aid
Language	English