5150
Managing multiple audio inputs to the
uDirect
When an audio source
is connected via the
uDirect , your hearing
aids will automatically
switch to special
programs.
It is possible to have multiple audio sources
connected and in operation with the uDirect :
• Two Bluetooth devices (e.g., phone and
uTV)
• One audio input (. mm audio plug)
• One direct audio input (Europlug)
Spoken status indicators and the audio
indicator light inform you about the connected
inputs.
An audio source is considered as “connected”
to the uDirect if:
• The audio plug is inserted (with or without
audio signal)
Previously-active
hearing program
3.5 mm plug
(audio jack)
FM
Europlug
Bluetooth
music 1
Bluetooth
music 2
• An FM receiver is inserted and receiving
an FM signal
• A Bluetooth music source is streaming
music or paused
• A Bluetooth phone is paired and within
reach
A phone call always has priority. You will hear
the ringing indication even when listening to
other audio sources via cable, Bluetooth or FM.
If you reject or terminate the call, audio
streaming will resume.
It is not possible to change hearing aid programs
using the access ( ) button as long as any
audio source is connected to the uDirect.
If you want to listen to music from your
connected mobile phone, you must start the
music via your phone initially; it cannot be
started from the uDirect .
To Next Page
Loading...
Need help?
General
