UNITY LAUNDRY SYSTEMS UTS29 Installation And Maintenance Instructions

14
Part. 14000101 Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
03 INSTALLATION
4. Attach the external supply hoses to the ports at each of the drilled holes.
5. Secure with proper clamps.
6. Maketheelectricalconnectionasspecied.
NOTE: Do not attempt to make chemical injection supply pump electrical connections to points other than those
provided specically for that purpose by the factory.
3.8. REMOVAL OF SHIPPING BRACES
WARNING
DO NOT REMOVE THE SHIPPING RESTRAINTS BEFORE PLACING
THE WASHER IN ITS DEFINITIVE POSITION.
NEVER START THE MACHINE UP WITHOUT FIRST REMOVING THE
SHIPPING RESTRAINTS.
NON-COMPLIANCE WITH THIS PRECAUTION MAY CAUSE SERIOUS
PHYSICAL DAMAGES TO PEOPLE AND IRREPARABLE DAMAGES
TO THE WASHER. THE WARRANTY DOES NOT COVER THIS
INCIDENCE.
After positioning, remove the lower front and back panels and remove the four shipping brackets that were used for
transportation support. Save the shipping brackets. If the washer ever needs to be moved to another location, replace the
transport system.

UNITY LAUNDRY SYSTEMS UTS29 Specifications

General

Brand	UNITY LAUNDRY SYSTEMS
Model	UTS29
Category	Laundry Appliance
Language	English