EasyManuals Logo
Home>UNITY LAUNDRY SYSTEMS>Laundry Appliance>UTS29

UNITY LAUNDRY SYSTEMS UTS29 Installation And Maintenance Instructions

Default Icon
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
26
Part. 14000101 Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
6.8 TROUBLESHOOTING
FAILURE CAUSE SOLUTION
The machine
does not run
· No Power
· Circuit Breaker Malfunction
· Controller Malfunction
· VFD Malfunction
· Check the circuit breaker, disconnect, and fuse
· Check the wire connection
· Check the interlock switch
· Check whether the power-on LED on the circuit
board is lit, if not, notify the manufacturer
· Check the controller for VFD alarm code
The drum is not
rotating at normal
speed
· The output frequency of VFD is
wrong
· Motor failed
· Bearing failed
· Belt failed
· Check VFD
· Check the voltage of the motor
· Check out-of-balance switch
· Check with hand whether the inner drum is turning
and remove foreign objects
· Check the belt or replace if necessary
Excessive water
in the laundry
· The drain is clogged
· VFD malfunction
· Low extract speed
· Out-of-balance switch too sensitive
· Check the drain valve and remove obstruction
· Contact manufacturer
· Rebalance the load
Excessive
vibration during
high extract
· Transport brackets are not removed
·Themachineisn’tinstalledlevel
· Out-of-balance switch malfunction
· Load is too small / big
· Loose bearing
· Damaged shock absorber
· Remove transport brackets
· Level machine
· Check out-of-balance switch and replace it if
necessary
· Ensure the load is between 7-35 lbs
· Contact manufacturer
· Replace shock absorber
Door leakage
· The door is not tight
· The door gasket is damaged
· The door is misaligned
· Replace the door gasket
· Check and adjust door hinges
Drumoverlling
· Water level sensor malfunction
· Water inlet valve malfunction
· Circuit board malfunction
· Check water level line, adjust or replace if
necessary
· Check the water inlet valve, replace if necessary
· Replace main relay PCB
No water in
· No water or the water pressure is
too low
·Cloggedwaterstrainerlter
· Water inlet valve malfunction
· Drain valve malfunction
· Check external water supply
·Cleanwaterstrainerlter
· Check the water inlet valve, replace if necessary
· Check drain valve, replace if necessary
Water leaking
· Drain valve malfunction
·Hosesleaking
· Check drain valve, replace if necessary
· Check hoses and hoses connections, replace or
tighten if necessary
06 MAINTENANCE

Other manuals for UNITY LAUNDRY SYSTEMS UTS29

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UNITY LAUNDRY SYSTEMS UTS29 and is the answer not in the manual?

UNITY LAUNDRY SYSTEMS UTS29 Specifications

General IconGeneral
BrandUNITY LAUNDRY SYSTEMS
ModelUTS29
CategoryLaundry Appliance
LanguageEnglish

Related product manuals