UNITY LAUNDRY SYSTEMS UTS29 Installation And Maintenance Instructions

20
Part. 14000101 Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
04 CONTROL INTERFACE ON-PREMISE
5.2 ALARMING
When an error occurs, the computer will signal an alarm automatically with an audible sound. Pressing <Start(Enter)> button
will stop the audible alarm sound. Press <Start(Enter)> button again after troubleshooting to clear the alarm. If the error has
been resolved or can be ignored, the computer will go back to “open” or “close” or “locked” status or else the computer will
alarm again.
NO. ALARM NAME TROUBLESHOOTING
#1 Error door status Please check the door switch or door pin.
#2 Over shock Please check if the load in the machine is too small or too large.
5.3 PROGRAMMING AND SETTING
Refer to the Operating manual.
5.4 RUNNING
Startup
After power is on, the LCD shows the startup interface for 10 seconds.
Unity UTS40
X1LD041AX1700
1.V100A00
X1LL020AX26001-
1.V100A00
4
Idle
Default program is Program 1.
Wash Temp: Cold
FREE MODE

UNITY LAUNDRY SYSTEMS UTS29 Specifications

General

Brand	UNITY LAUNDRY SYSTEMS
Model	UTS29
Category	Laundry Appliance
Language	English