UNITY LAUNDRY SYSTEMS UTS40 User Manual

5
Part. 14000001 Rev. 04//2021 ®/™ ©2021 Unity Laundry Systems. All rights reserved.
SAFETY INFORMATION
0.1 EXPLANATION OF SAFETY MESSAGES
Precautionarystatements[“DANGER,”“WARNING,”and“CAUTION”],followedbyspecicinstructions,arefoundinthis
manual and on decals on the washer. These precautions are intended for the personal safety of the operator, user, servicer
and those maintaining the machine.
DANGER
Indicates an imminent hazardous situation that, if not avoided, will
cause severe personal injury or death.
WARNING
Indicates a hazardous situation that, if not avoided, could cause
severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided, may cause minor
or moderate personal injury or property damage.
Additionalprecautionarystatements[“IMPORTANT”and“NOTE”]arefollowedbyspecicinstructions.
IMPORTANT: The word “IMPORTANT” is used to inform the reader of specic procedures where minor machine
damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is
important but not hazard related.
0.2 IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of re, electric shock, serious injury or death to
persons when using your washer, follow these basic precautions:
1. The actions described in these instructions are intended for use by 1) licensed plumbers or electricians if installation
by such licensed professionals for this type of product is required by your state or local law; or 2) competent personnel
experienced in installing such equipment who are installing in a state or local jurisdiction that does not require licensed
professionals to make such installations.
2. Any actions carried out by personnel who do not meet the requirements of “1.” directly above will be considered to be
improperandwillresultintheautomaticvoidingofthemachine’swarranty.
3. Receiving, unpacking, and positioning of the product must be done as instructed elsewhere in this manual and compliant
with OSHA or other applicable safety standards for the handling of such heavy equipment.
4. The manufacturer will not accept responsibility for any physical and/or material damage caused by actions performed on
the machine undertaken by unauthorized personnel.
5. Do not store or install the machine in areas exposed to the ELEMENTS or where it may be splashed by water.

UNITY LAUNDRY SYSTEMS UTS40 Specifications

General

Brand	UNITY LAUNDRY SYSTEMS
Model	UTS40
Category	Laundry Appliance
Language	English