Universal Remote Control osiris User Manual

Note: If a component fails to turn off after you have entered all of the code
numbers listed for your brand, you can scan through the other brands in the
table using the UP and Down buttons, then tapping either the Power On or
Power Off buttons to see if the component powers off (there is a chance that
your component was actually manufactured by another brand). However,
most of the code tables are so large it is usually faster to use the Learning
Method on Page 10.
When the component turns off, save the code number you entered
by pressing the SAVE button that appears on the screen.
Exit SETUP mode by pressing the MAIN button two times. When
the display shows “MAIN”, you are back in normal operating
mode.
SAVE
Button
Code
Number
You
Entered
MAIN
Button
8
The Osiris
8
9
Scan Up to the next Code
Number
Scan Down to the previous
Code Number
Press Power On or Power
Off to test if the device
powers off.
TV
089
UP
DOWN
SAVE
EXIT
PRESS
TV
089
UP
DOWN
SAVE
EXIT
PRESS
SETUP
P-PRO
LEARN
EDIT
MACRO
FAV
1 0F 2
MX350 Manual.qxd 8/13/2004 10:03 AM Page 8

Universal Remote Control osiris Specifications

General

Brand	Universal Remote Control
Model	osiris
Category	Remote Control
Language	English