Page 5
Displaying the Settings Menu
The Settings menu is where options such as screen
brightness, button beep volume and more can be adjusted.
Information on the hardware and software configuration can
also be accessed from this Settings menu.
The Settings menu is accessed by pressing and holding the
Main and ENT buttons simultaneously for three seconds.
Once the Settings menu appears, the next action must made
within 60 seconds, after which time the remote will revert
back to the Main screen.
The available selections of the
Settings menu extend beyond what
is visible on the initial screen; use
the navigation pad in the center of
the remote to move up and down
the list, highlighting available
selections. To select an item,
highlight the desired item, then
press the SEL (Select) button in the
center of the navigation pad. To go
back a step or to EXIT the settings
screen, press the Main button.
TRC-820 TWO-WAY REMOTE
Navigate down to reveal
the rest of the settings
ENT button
(Necessary to enter
Setup Menu)
Main button
(Necessary to enter
Setup Menu)
To Next Page
Loading...
Need help?
General
