Universal Robots UR3e Installation Guide

11.Certifications
This section contains information about certificates and declarations valid for UniversalRobots
robots with OEM controllers.
11.1. Shipping materials
As stated by our suppliers, UniversalRobots robots shipping materials comply with the ISPM-15
requirements for producing wood packaging material and are marked accordingly.
11.2. Certification of quality
UniversalRobots robots undergo continuous internal testing and end-of-line test procedures. UR
testing processes undergo continuous review and improvement.
11.3. Declarations according to EU directives
UniversalRobots robots are certified according to the following directives.
•
2006/42/EC – Machinery Directive (MD)
According to the Machinery Directive 2006/42/EC, UniversalRobots robots are partly
completed machinery, and do not have a CE mark on them.
The declaration of incorporation according to 2006/42/EC annex II 1.B. is in section EU
Declarations of Incorporationbelow and EU Declarations of Incorporationbelow.
•
2011/65/EU – Restriction of the use of certain Hazardous Substances (RoHS)
See section China RoHSon page38.
•
2012/19/EU – Waste of Electrical and Electronic Equipment (WEEE)
For information on disposal of electrical and electronic equipment waste, refer to chapter7,
Disposal and Environment in the robot user manual.
EU Declarations of Incorporation
Installation Guide OEM Control Box
Copyright © 2019–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR3e Specifications

General

Brand	Universal Robots
Model	UR3e
Category	Robotics
Language	English