Universal Robots UR3e Installation Guide

2.Cleaning Your Robot
2.1. Everyday Cleaning
You can wipe away any dust/dirt/oil observed on the robot arm and/or Teach Pendant using a cloth
and one of the following cleaning agents: Water, 70% Isopropyl alcohol, 10% Ethanol alcohol or
10% Naphtha. In rare cases, very small amounts of grease can be visible from the joint. This does
not affect the function, use, or lifetime of the joint.
2.2. Additional Cleaning
Due to the added focus on cleaning your robot, UniversalRobots recommends cleaning with 70%
isopropyl alcohol (rubbing alcohol).
1. Wipe the robot with a hard twisted micro fiber cloth and 70% isopropyl alcohol (rubbing
alcohol).
2. Let the 70% isopropyl alcohol dwell on the robot for 5 minutes, and then clean the robot using
standard cleaning procedure.
DONOTUSEBLEACH. Do not use bleach in any diluted cleaning solution.
OEM Control Box Installation Guide
Copyright © 2019–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR3e Specifications

General

Brand	Universal Robots
Model	UR3e
Category	Robotics
Language	English