Unox SpidoCook User Manual

For proper electrical connections, the appliance must:
- Bewiredintoanequipotentialsysteminaccordancewithcurrentregulations.Thisconnectionmustbeper-
formed between dierent appliances with the terminal marked with the equipotential symbol . The wire
musthaveamaximumcross-sectionof10mm2(accordingtoIECEN60335-2-42:2003-09standard)andbe
yellow-green.
- Must be grounded
totheearthing(green-yellowwire).
- Must be connected to a thermal dierential switch in compliance with the regulations in force.
- Must be connected to an omnipolar circuit breaker.
Mad
e
b
y:UN
O
X
S.
p
.
A.
Via Major
an
a
22,35010
Cad
o
n
egh
e
- Padov
a
(I
TALY)
P
h
t
:44,2
k
W
Qn:
35 k
W
P
e:
8,2
kW
220-
240V
1N˜220-
240V 3N
˜/380-
415V
3N˜50/
60 H
z
150-
600
k
P
a
G
R
O
S
S
WEI
G
H
T:
235
kg N
ET WEIGHT:
220
k
g
2014
S/N
7143
IN
T:
0705 N
°705CL234
SpidoCo
o
k
TM
XP
3902067143
Checks
- The copper jumper and the electrical cable must be secured together beneath the screw in its tightening direction; and
the electrical connections must be well secured before connecting the appliance to the mains electricity.
- check for any electrical dispersion between the phases and the ground, and for electrical continuity between
the external casing and the main ground line.
- Check that the power supply voltage does not deviate from the nominal voltage value specied on the ap-
pliance rating plate when the appliance is operating.
Replacing the power supply cable
35010 Cadoneg
he - P
adova (ITALY)
2
0-240V 3N˜/380-41
,
5V 3N˜50/60 Hz 150-600 kPa
2014
4
SpidoCook
P
TM
The cable must be replaced by UNOX or by
its technical assistance service, and in all
cases by a person with similar qualication
in order to avoid possible risks.
Follow the procedures below to replace the power
supply cable:
- open the terminal board cover;
- remove the cable by disconnecting it from the ter-
minal board;
- consult the “Technical Specications” sheet (Power
supply-Connection Diagram: the sheet indicates
all possible wiring diagrams and the specications
that the new cable must have in reference to the
wiring selected (CableType) ;
- secure the new cable using the cable clamp;
- Close the terminal board cover.
english
13
SpidoCook
™

Unox SpidoCook Specifications

General

Brand	Unox
Model	SpidoCook
Category	Ranges
Language	English