uPunch HN3000 User Manual

28
ER 91—Print Head Motor Issue: wrong position, left
and right
ER 92—Card Feed Motor Issue: wrong position, up
and down
5.4 Resetting the HN3000
To simply restart the time clock, press the Reset button.
To restore the default values, move the Set switch to the
“0” position (to the right). Then press the +, Clear, and
Mode keys simultaneously until you hear three beeps.
Finally, move the Set switch back to the “–” position (to
the left). Setting the clock to factory reset will restore the
default values, including: Date, Time, Time Signal, Print
Color Options, and Printing Position.
See “4.2—Changing the Settings in the HN3000” to
complete setup.

uPunch HN3000 Specifications

General

Brand	uPunch
Model	HN3000
Category	Clock
Language	English