uPunch HN3000 User Manual

50
8.0 REPLACING HN3000/
HN4000 RIBBON
CARTRIDGE
To replace the ribbon cartridge in your time clock, follow
these steps.
Open the top cover and press the button
corresponding with column 4 to move the ribbon
cartridge to center.
As shown in the gure below, pull the ribbon holders
toward you and, holding them steady in the position,
use the handle to take out the cartridge.
Insert a new cartridge between the ribbon guide and
the printer head.
Push the cartridge head until it clicks into place. Turn
the knob clockwise to fasten the ribbon.
NOTE: We strongly recommend that you use genuine
manufacturer time recorder ribbons. Using non-
genuine or non-compatible ribbons may damage
your printer and void your warranty.

uPunch HN3000 Specifications

General

Brand	uPunch
Model	HN3000
Category	Clock
Language	English