USR IOT USR-WIFI232-630 User Manual

Convert Server User Manual www.usriot.com
Jinan USR IOT Technology Limited 27 / 44 tec@usr.cn
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
admin
Password
admin
6.1.1. Open Web Management Interface
Step 1: Connect laptop to SSID “USR-WIFI232-630_xxxx” of Convert Server via wireless LAN card;
Step 2: After wireless connection OK. Open browser and access “http://10.10.100.254”;
Step 3: Then input user name and password in the page as following and click “OK” button.
Figure 18 Open Web Management page
The Convert Server web management page support English and Chinese language. User can select
language environment at the top right corner and click “Apply” button.
The main menu include nine pages: “Quick Configure”,“Mode Selection”,” AP Interface Setting”,”STA
Interface Setting”,”Application Setting”, “Ethernet Setting”,’’HTTPD Client mode”,“WEB IO”and “Device
Management”.
6.1.2. Quick Configure
This page provides users with a method of rapid configuration Convert Server.Users according to the steps to
configure the parameters and restart the Convert Server page, you can let the Convert Server is normal work,
reduced the configuration steps and time.Of course the options on this page is less, if some detailed
configuration, still need to the corresponding configuration page.

USR IOT USR-WIFI232-630 Specifications

General

Brand	USR IOT
Model	USR-WIFI232-630
Category	Server
Language	English