Brief operating instructions
For detailed information, please read the corresponding
section in these installation instructions.
1. Switching off Heating mode (Summer mode) (¬ section 4.10.2)
50 50
Target flow temp.
Back
Heating off
Target flow temp.
Cancel Ok
> Right-hand selector but-
ton "
"
> –-Button to "Heating off" > Confirm "OK"
2. Setting the heating temperature (switching on Heating mode)
(¬ section4.7.1)
50
50
Target flow temp.
Back
48
Target flow temp.
Cancel Ok
> Right-hand selector but-
ton "
"
> +/– button for selecting
the temperature
> Confirm "OK"
3. Setting the hot water temperature (¬ section 4.8)
50 45
DHW temperature
Back
48
DHW temperature
Cancel Ok
> Left-hand selector button
"
"
> +/– button for selecting
the temperature
> Confirm "OK"