Val Controls IDC24-AF User Manual

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
72/74
No. 71
Endpoint calibration was started
Description
An endpoint calibration was started
No. 72
Endpoint calibration finished
Description
An endpoint calibration finished
No. 73
Endpoint calibration aborted
Description
An endpoint calibration was aborted
No. 81
A scheduler action is required
Description
An auto calibration was started
No. 82
Auto calibration finished
Description
An auto calibration finished
10.1 Argument
For the events describing an action the argument denotes what is the responsible for the action.
No.
Responsible
Description
1
Remote
The action was initiated through Remote controlled digital inputs
2
Local
The action was initiated through Local controlled digital inputs
3
Menu
The action was initiated through the local interface on the device-
11
HART
The action was initiated through HART communication
12
Modbus
The action was initiated through Modbus communication
21
ESD
The action was initiated as an ESD occurred
31
Auto cal.
The action was initiated by the auto-calibration procedure
32
Scheduler
The action was initiated by scheduler

Val Controls IDC24-AF Specifications

General

Brand	Val Controls
Model	IDC24-AF
Category	Controller
Language	English