6
Energy Core Ventilator
Hang Mounting
with Hanging Vibration Isolators
• The hanging isolator kit includes four (4) isolators and
required hardware.
• Locate the support rods as shown in the drawing.
• Assemble each isolator as shown below.
Model A B C
ERC-M1
44.8 14 39.4
ERC-M2
44.8 19.2 39.4
All dimensions are in inches.
A
B
C
Isolator
Flat Washer
Lock Washer
Nut
1/2-inch threaded rod,
provided by others
Flat Washer
Lock Washer
Nut
Hanger bracket,
factory-mounted
Hanging Vibration Isolator Assembly
Side
Discharge
End
IMPORTANT
The ERC-M unit can be hung in any orientation.
The installation contractor is responsible for safely
mounting the unit to provide appropriate removal or
access to the panels and unit components.
The system design and installation should follow
accepted industry practices, such as described in the
ASHRAE Handbook and SMACNA.
As standard, the ERC-M is to be mounted in a
horizontal orientation but can also be mounted on its
side or a vertical position.
Intake
End
Electrical
Connection
Vertical
C
D
B
A
Discharge
End
Intake
End
Filters
Electrical
Connection
CoreCore
Horizontal
Installation
To Next Page
Loading...
General