Vanderbilt CD30 Codoor User Manual

Mounting
12
Vanderbilt International (IRL) Ltd.
05.2016
9 Mounting
9.1 Technical details
NOTE 1
Do not mount two CD30 units back to back on one door. They cannot both control the latch.
 CD30 is suitable for most doors with handle-operated mortise locks.
 The distance between the centre of the handle and the centre of the cylinder
should be between 105 – 116 mm.
 Latchbolt function.
 The handle must have an 8 mm square spindle.
 The handle’s fixing holes should be at 30 – 38 mm centres (diagonal).
 The CD30 can be used with a variety of locks such as ASSA 8561 or 565 – but
not the ASSA 410 series.
 The backset should be 70 mm.
Fig. 3 CD30 door mounting
Backset = 70 mm

Vanderbilt CD30 Codoor Specifications

General

Brand	Vanderbilt
Model	CD30 Codoor
Category	Locks
Language	English