10
support.vax.co.uk
CLEANING & MAINTENANCE
Press the dirty water tank release latch and pull the tank to remove.
Push the button on the wash tool to
release the nozzle.
Rinse the nozzle under water to remove
dirt/debris.
Remove any dirt and debris from the
filter located underneath the dirty
water tank.
CLEANING THE FILTER
CLEANING THE WASH TOOL NOZZLE
WARNING: Always switch o the machine and remove the battery before carrying out any
maintenance or troubleshooting.
IMPORTANT: If the nozzle is tted incorrectly, this will cause poor dirty water pick up.
NOTE: Before using the machine to clean dried-on stains and dirt, the ooring should be
vacuumed throughly. This will prevent a build up of dirt and debris in the hose and nozzle.
40°C
MAX
To Next Page
Loading...
Need help?
General
