9
support.vax.co.uk
CLEANING & MAINTENANCE
WARNING: Always switch o the machine and remove the battery before carrying out any
maintenance or troubleshooting.
IMPORTANT: Empty and rinse out the water/solution tank and dirty water tank and leave to air dry
before replacing.
Press the dirty water tank release latch and pull the tank to remove.
Empty the dirty water over the sink.
Rinse the dirty water tank and lid under
water (max 40°C) to remove dirt/debris.
Replace the lid.
Lift the lid to remove from the dirty
water tank.
To re-fit, tilt the dirty water tank and
line the front of the tank up onto spot
washer. Push back until it clicks into
place.
EMPTYING AND CLEANING THE DIRTY WATER TANK
To Next Page
Loading...
Need help?
General
