8
support.vax.co.uk
GETTING STARTED
Lift the wash tool and hose out of the
holder to release from the side of the
machine.
Press the trigger on the handle to
release water and solution.
Hook the tabs on the selected attachment
into the wash tool and clip into place.
Use the brush to agitate any stubborn
stains.
Select the desired tool attachment.
Release the trigger to recover the water
and solution.
NOTE: For heavily soiled areas, it may be necessary to repeat the cleaning process.
Make criss-crossing strokes across the original pattern and overlap with each pass.
OPERATION
To Next Page
Loading...
Need help?
General
