Vax S2 Series User Manual

-
Operation
Steam cleaning hard floors
Refreshing carpets
IMPORTANT: When using on carpets, always ensure the microfibre cleaning pad is properly attached to the floor
head.
IMPORTANT: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
Plug into mains and wait
for the green light (on the
main body) to switch on
within 1 min.
To recline the unit place
foot on floor head and tilt
handle.
To produce steam squeeze
the trigger in short bursts.
To prevent overly wetting
floors, do not hold down
continuously.
M
o
v
e t
h
e
st
eam
mo
p
slo
wly
back
war
d
s
an
d
fo
r
war
d
s
acr
o
ss t
h
e
flo
o
r
pay
i
n
g
par
t
i
cular
at
t
en
t
i
o
n
t
o
h
i
gh
t
r
affi
c
ar
eas.
Place unit into carpet
glider.
To recline the unit place
foot on floor head and tilt
handle.
To produce steam squeeze
the trigger in short bursts.
To prevent overly wetting
carpet, do not hold down
continuously.
Move the steam mop slowly
backwards and forwards
across the floor paying
particular attention to high
traffic areas.
6
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
WARNING: Never leave the steam mop in one spot on any surface for an extended period of time with a damp or wet
microfibre cleaning pad attached as this may damage the floor surface. Your steam mop should only be used on tiles,
lino, sealed wood flooring including sealed laminate.
WARNING: Do not operate/use steam mop without water in clean water tank.
IMPORTANT: For 1 x 500ml water tank = 15 minutes steaming time (aprox).
IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steam mop on a
discrete area of flooring to begin with.

Vax S2 Series Specifications

General

Brand	Vax
Model	S2 Series
Category	Steam Cleaner
Language	English