Press on the handle release
pedal and pull the cleaner
back into a reclined position.
Grasp the handle and pull
up out of the base, take care
to ensure that no dirty water
leaks from the front.
Turn the power and brush
bar switches on.
Grasp the top of the dirty
water tank handle and press
the release latch.
For best results apply
solution on the forward
stroke and release the
trigger to recover solution
on the backward stroke.
Remove dirty water tank lid.
Empty the water tank by
grasping the handle with
one hand and nozzle with
the other and empty into
the sink.
Emptying the dirty water tank
NOTE: Rinse out tank with clean water and leave to air dry before storing your machine.
1
2
WARNING: Always switch o and unplug the carpet washer from the electrical outlet before assembling,
lling and emptying the clean water tank, emptying the dirty water tank, or before connecting/disconnecting
the attachments.
To Next Page
Loading...
Need help?
General
