Vector X2 Operating Manual

X2-OPERATING MANUAL
Doc : 70-00-0736, Serie X2, 20190206 © Vector Controls GmbH, Schweiz Page 1
subjects to alteration www.vectorcontrols.com
VECTOR
Operating instructions for the
X2 operating system
The X2 operating system was designed for universal controllers and sensors. Devices based on the X2
operating system contain a multitude of standardized functions and application possibilities. From simple
ventilation controllers for domestic applications to HVAC system solutions for entire buildings. There is a
suitable solution for almost every application. With the EasySet program, the controllers can be conveniently
read out, programmed and transferred to other controllers.
Applications
These operating instructions apply to devices of the X2 series with integrated control unit, as well as to devices of the
OPA2 and OPU2 series.
Ordering
Model
Items
Description
OPA2-VC
40-500007
Remote terminal
OPA2-2T-VC
40-500047
Remote terminal with T + 2 passive inputs
OPA2-2TH-VC
40-500023
Remote terminal with RHT + 2 passive inputs
OPU2-T-VC
40-500100
Remote terminal with T
OPU2-TH-VC
40-500101
Remote terminal with RHT
OPU2-2T-VC
40-500024
Remote terminal with RT + 2 passive inputs
OPU2-2TH-VC
40-500025
Remote terminal with RHT + 2 passive inputs
In addition, the various product descriptions and the programming instructions for technicians are contained in separate
documents. This should facilitate the work with the different controllers and operating levels.

Vector X2 Specifications

General

Brand	Vector
Model	X2
Category	Controller
Language	English