22
2.4 ELECTRICAL
SPECIFICATIONS
E1 PRIMA is available with 220 V 50-60 Hz
mono phase.
Plug the machine into the main socket.
WARNING
RISK OF SHORT CIRCUITS
Prior to connecting the machine to the
electrical mains, assess that the volt-
age shown on the machine’s data plate
corresponds with that of the mains.
2.3 WATER SPECIFICATIONS
Monitoring of water recipe to keep it within
required levels and maintenance of filtra-
tion system is the user's responsibility.
Failing to meet and maintain water at the
following levels will void the entire warranty.
Total hardness ppm 50 - 60
Waterline
pressure
bar
2 - 5
(cold water)
Minimum flow l/hr 200
Chloride micron < 1.0
Alkalinity ppm 10 - 150
Total dissolved
salts (TDS)
ppm 50 - 250
Chloride
mg/L < 0.5
pH 6.0 - 8.0
05