27
2.6 PROCEDURE OF FIRST
POWERING ON
When first powering ON the machine, pro-
ceed as it follows:
Switch ON the machine from the main
switch positioned to the bottom on the
right.
As first powering ON, the machine en-
ters the FILLING procedure: the message
'FI appears on the group display and the
group keys flash fast.
When the group keys flash more slowly,
press and hold the keys 1A and 1C togeth-
er until procedure is engaged. The ma-
chine will start the pump to fill the coffee
boiler for 20 seconds and water will come
out from the group.
NOTE
If this cycle is interrupted due to a
power outage, or if the machine is acci-
dentally switched OFF from the main
switch, the next time the machine is
switched ON, the cycle will automati-
cally start again.
NOTE
If the cycle does not end with the out-
flow of water from the group, it is rea-
sonable to turn the machine OFF imme-
diately and restart the procedure from
step 1, to check whether or not there are
problems filling the coffee boiler.
17
18
19