PLEASE NOTE: Most universal remote controls may only operate the main
functions of your device. To control every function of your device you may want
to consider purchasing an original remote control from the device manufacturer.
DEVICE BUTTONS
There are 5 Device buttons near the top of this remote below the POWER & SET
buttons. These Device buttons are used to choose which device you want to
program / control. The corresponding Device button can control the following
devices:
TV – Televisions
DTC – Digital Television (DTV) Converter Boxes (used for Antennas, or
Digital Cable / Satellite systems on Analog TVs)
SAT – Satellite Boxes (ex: DirecTV, Dish Network, etc.)
VCR – Video Cassette Recorders
DVD – DVD Players, Blu-ray Players
DVR – Digital Video Recorders (ex: TiVo, DVRs from your Cable Company, etc.)
AUX – CD Players, Media Centers
AUDIO – Stereo Systems, Home Theater in a Box (HTiB) Systems
CABLE – Cable Boxes
NOTE FOR COMBINATION UNITS: For combination units such as TV / DVD,
TV / VCR, or TV /DVD / VCR you must program both the TV & DVD / VCR
Function buttons. Once these buttons are programmed successfully, the TV
button controls the TV functions of your unit, and the DVD / VCR button will
control the DVD and/or VCR functions of the unit.
There is a specific section in the Code List for combination units. The codes in
this section should be tried first using the Brand Code Entry method on both the
TV & DVD / VCR buttons. If this is unsuccessful, follow the normal programming
methods for programming both the TV and DVD / VCR buttons.
To Next Page
Loading...
Need help?
General